Scepter 4524 Slim Tamper-Alert BLE Tag

Slim Bluetooth 5.0 asset tag with rear-switch removal detection, a replaceable CR2032 battery and adhesive mounting. For office, medical and warehouse equipment using compatible BLE gateways and software.

Request a Quote

WHY SCEPTER 4524

Slim asset identification with removal detection

5.4 mmLow-profile housing
Tamper alertRear release switch
IP53Ingress protection
2 yearsAt 0 dBm / 10 s interval
REMOVAL DETECTION

Know when a tag leaves its asset

Adhesive mounting keeps the rear switch pressed against the asset. Releasing it after more than 10 seconds triggers a 30-second tamper-alert broadcast while the tag is powered on.

A compatible BLE gateway and software can receive the alert and associate it with the asset record. The alarm is transmitted in the broadcast data; there is no LED indication during a tamper event.

InstallationDouble-sided adhesive
Alert duration30 seconds
Access protectionUser connection key
TECHNICAL SPECIFICATIONS

Scepter 4524 specifications

Mechanical & environment
Dimensions45.2 × 23.6 × 5.4 mm
Housing / colourABS / white
Weight7 g
MountingDouble-sided adhesive
Ingress protectionIP53
Operating temperature−20 to +60°C
Storage temperature−40 to +80°C
Part number523K111
Bluetooth & power
Bluetooth5.0; 2.4 GHz
ChipsetNordic nRF52 series
Broadcast formatsiBeacon / Beacon / Eddystone
BatteryReplaceable CR2032, 220 mAh
Battery-life referenceUp to 2 years at 0 dBm / 10 s interval
Connection protectionUser-settable connection key
Compliance & reportsCE / FCC / RoHS
Operation & integration
DetectionRear tamper switch
Alarm outputBLE tamper-status broadcast
Battery reportingBattery level and voltage in broadcast data
Power controlPress for 2–8 seconds, then release
Power indicationGreen flashes: on; red flashes: off
System requirementCompatible BLE receivers and application software

Battery life depends on broadcast settings, enabled frames and alarm frequency. The 2-year reference does not describe the faster default broadcast profile below.

Broadcast profile and installation notes

The supplied V1.1 manual specifies 0 dBm transmit power. In normal operation, the tamper-status frame broadcasts every 5 seconds and the iBeacon frame every 1 second. During the 30-second alarm period, these intervals change to 1 second and 2 seconds respectively.

Mount on a clean, flat surface so the rear switch remains pressed. Keep adhesive clear of the moving switch and verify removal detection with your gateway before deployment. Available broadcast formats and the selected profile should be matched to the supplied firmware.

APPLICATIONS

For small, movable and high-value assets

Office equipment
Medical equipment
Warehouse assets
High-value portable equipment

Use with a compatible BLE infrastructure for asset visibility and indoor location workflows. Tracking coverage and location performance depend on receiver layout and the software platform.

PRODUCT ENQUIRY

Enquire about Scepter 4524



    Optional technical details





    Scepter 4524 Slim Tamper-Alert BLE Tag
    This website uses cookies to improve your experience. By using this website you agree to our Data Protection Policy.
    Read more