Adamnium 5213 On-Metal UHF RFID Tag
52 x 13 x 2.5mm FR4 902-928MHz ISO 18000-6C product. Current reference range: Up to 5m; validate the installed application.
Adamnium 5213 for application-specific industrial identification
Adamnium 5213 is an industrial UHF RFID tag for metal assets with a published selection range of Up to 5m. Its 52 x 13 x 2.5mm form factor supports projects where the available mounting space and identification workflow must be evaluated together.
The current record lists Screw, rivet, adhesive, epoxy. Select the installation method around the asset geometry, production process and mechanical load.
Use the published range as a comparison point, then test the installed read zone
The listed on-metal read range is a product-selection reference, not a guaranteed deployment distance. Reader power, antenna, asset geometry, orientation, mounting and the surrounding RF environment determine the installed result.
Validate representative samples with the intended reader, asset, orientation and final mounting process before volume deployment.
Adamnium 5213 specifications
Values above are based on the current and legacy Crepak product records. Any certification, ingress, extreme range or environmental requirement must be supported by the controlled production specification and current test evidence for the ordered SKU.
Qualify the final installation
- Test the actual asset material and geometry.
- Keep tag orientation and mounting process consistent.
- Confirm bonding or fastener loads do not damage the tag.
- Re-test RF performance after final installation.
Choose by installed performance, not headline range alone
Compare footprint, retention, environmental exposure and required read zone. Request samples when the project has metal, temperature, chemical, impact or embedding constraints.
- Specify the destination frequency region.
- Share reader and antenna details.
- Define normal and worst-case orientations.
- Confirm current test and compliance documents required for approval.
Application starting points for Adamnium 5213
Validate Adamnium 5213 before volume deployment
Evaluate representative samples with the intended asset, reader and operating environment. Include both normal and worst-case read orientations.
Adamnium 5213 selection FAQ
Is the listed read range guaranteed?
No. It is a selection reference. The installed result depends on reader power, antenna, orientation, asset geometry, mounting and the RF environment.
Which data should be confirmed before ordering?
Confirm the IC, memory, frequency region, encoding, marking, mounting and evidence required for production acceptance.
When are samples required?
Use samples whenever the application includes metal, embedding, tight read zones, temperature cycling, chemicals, impact, persistent moisture or regulated approval requirements.
What belongs in the RFQ?
Provide the asset, installation area, read-zone target, reader setup, environment, destination region and expected quantity.
Evaluate Adamnium 5213 for your application
Send Crepak the asset, read-zone and installation requirements. We can help compare the form factor and arrange representative samples for validation.


