Adamnium 6219 Long-Range On-Metal UHF RFID Tag

62 x 19 x 2 mm FR4 on-metal UHF RFID tag for indoor industrial assets, racks and returnable transport items. The current product record lists up to 9 m on metal; validate the installed read zone before deployment.

Request a Quote

Category: SKU: 1344121

TECHNICAL DOWNLOADS

WHY ADAMNIUM 6219

A practical long-range on-metal RFID tag for indoor industrial assets

Adamnium 6219 is a long-range on-metal UHF RFID tag for indoor metal assets that provide a 62 x 19 mm mounting area. Its FR4 construction and adhesive or epoxy mounting support asset identification across racks, fixtures, returnable transport items and work-in-process environments.

The current product record lists an NXP UCODE 8 chip and 128-bit EPC memory. Confirm the production frequency, encoding and mounting process in the quotation.

62 x 19 x 2 mmFR4 industrial form factor
Up to 9 mCurrent on-metal reference
NXP UCODE 8128-bit EPC product record
Bonded installationAdhesive or epoxy
ON-METAL READ PERFORMANCE

Use the 9 m reference to compare options, then validate the real read zone

The current Crepak product record lists up to 9 m when Adamnium 6219 is mounted on metal. This is a product-selection reference rather than a guaranteed installed distance.

Actual performance depends on the reader output, antenna gain and polarization, tag orientation, asset geometry, mounting material, surrounding metal and the RF environment. Test representative samples on the intended asset before production release.

On-metal referenceUp to 9 m
Frequency902–928 MHz
ProtocolISO 18000-6C
Primary positioningIndoor metal assets
TECHNICAL SPECIFICATIONS

Adamnium 6219 specifications

Mechanical
MaterialFR4
Dimensions62 x 19 x 2 mm
Weight5.1 g
MountingAdhesive / epoxy
RF
Frequency902–928 MHz
ProtocolISO 18000-6C
ChipNXP UCODE 8
EPC memory128 bits
Read rangeUp to 9 m on metal; application-dependent
Deployment boundary
Primary directoryOn-Metal RFID Tags
EnvironmentConfirm temperature, moisture, chemical and UV exposure
Mechanical dutyConfirm impact, vibration and bonding loads
Production releaseConfirm frequency, encoding and mounting

Mechanical and RF values above are based on the current Crepak product record. Request the current production specification when temperature, ingress, compliance, lifecycle or formal test evidence is part of the acceptance criteria. No unsupported certification or environmental claim is made on this page.

MOUNTING & INSTALLATION

Control the bonded installation for repeatable RF performance

Adamnium 6219 is positioned for adhesive or epoxy installation. The appropriate bonding system depends on the asset surface, production process, mechanical load and operating environment.

  • Clean and prepare representative asset surfaces before testing the bond.
  • Keep tag orientation and adhesive or epoxy thickness consistent.
  • Confirm the mounting process does not bend or damage the FR4 body.
  • Re-test the read zone after the final bonding process is applied.
BEST FIT / NOT SUITABLE

Choose 6219 when the asset provides more mounting area and the project needs a longer reference read zone

Adamnium 6219 is best suited to indoor metal assets with sufficient flat mounting area. It is not the preferred choice for very narrow tools, severe impact, persistent moisture, sustained high temperature or harsh outdoor exposure without separate installation validation.

BEST-FIT APPLICATIONS

Industrial applications for Adamnium 6219

Indoor Asset Tracking
Rack & Shelf Identification
Work-in-Process Tracking
Pallet & Trolley Tracking
Returnable Transport Items
Application validation
APPLICATION VALIDATION

Validate Adamnium 6219 on the real asset before volume deployment

Evaluate representative samples with the intended metal asset, bonding process, reader, antenna and operating environment. Include normal and worst-case tag orientations, then document the accepted read zone before production release.

The product-page RFQ below collects the core application inputs required for engineering review, sample planning and commercial quotation.

Selection questions
COMMON SELECTION QUESTIONS

Adamnium 6219 selection FAQ

Is the 9 m read range guaranteed?

No. Up to 9 m is the current on-metal selection reference. Confirm the required distance on the real asset with the intended reader, antenna, mounting and orientation.

Can Adamnium 6219 be used on non-metal?

Its primary positioning is on-metal identification. If the project includes non-metal assets, test that substrate separately rather than assuming the on-metal reference applies.

How should Adamnium 6219 be mounted?

The current product record lists adhesive and epoxy mounting. Select and validate the bonding system around the asset surface, production process and environmental exposure.

What should be included in an RFQ?

Provide the asset material and dimensions, mounting area, required read distance, reader setup, frequency region, environmental exposure and expected quantity.

PRODUCT ENQUIRY

Enquire about Adamnium 6219



    Optional technical details





    ALTERNATIVE RFID TAGS

    Other Options for This Application

    Compare alternative sizes, constructions or mounting options for the same application.

    Adamnium 6219 Long-Range On-Metal UHF RFID Tag
    This website uses cookies to improve your experience. By using this website you agree to our Data Protection Policy.
    Read more