Saber 80 Long-Range On-Metal UHF RFID Tag

128 x 30 x 8.5mm ABS 902-928MHz, 866-868MHz ISO 18000-6C product. Current reference range: Up to 10 m/33 feet; validate the installed application.

WHY SABER 80

Saber 80 for application-specific industrial identification

Saber 80 is an industrial UHF RFID tag for metal assets with a published selection range of Up to 10 m/33 feet. Its 128 x 30 x 8.5mm form factor supports projects where the available mounting space and identification workflow must be evaluated together.

The current record lists Screw, rivet, adhesive, epoxy. Select the installation method around the asset geometry, production process and mechanical load.

128 x 30 x 8.5mmExternal form factor
Up to 10 m/33 feetCurrent reference read range
Impinj R6PCurrent product record
Screw, rivet, adhesive, epoxyInstallation options
ON-METAL READ PERFORMANCE

Use the published range as a comparison point, then test the installed read zone

The listed on-metal read range is a product-selection reference, not a guaranteed deployment distance. Reader power, antenna, asset geometry, orientation, mounting and the surrounding RF environment determine the installed result.

Validate representative samples with the intended reader, asset, orientation and final mounting process before volume deployment.

Reference rangeUp to 10 m/33 feet
Installation checkSubstrate test
Frequency902-928MHz, 866-868MHz
ProtocolISO 18000-6C
TECHNICAL SPECIFICATIONS

Saber 80 specifications

Mechanical
Material
ABS
Dimensions
128 x 30 x 8.5mm
Weight
15.5 g/0.55 Oz
Mounting
Screw, rivet, adhesive, epoxy
RF
Frequency
902-928MHz, 866-868MHz
Protocol
ISO 18000-6C
Chip
Impinj R6P
Memory
128 bit EPC
Read range
Up to 10 m/33 feet on metal assets; application-dependent
Qualification boundary
Operating temperature
-40 – 85℃
Storage temperature
-40 – 85℃
Ingress record
IP68 appears in the legacy product record; confirm current test evidence for the ordered construction.
Production release
Confirm ordered IC, memory, frequency and marking in the quotation.

Values above are based on the current and legacy Crepak product records. Any certification, ingress, extreme range or environmental requirement must be supported by the controlled production specification and current test evidence for the ordered SKU.

MOUNTING & INSTALLATION

Qualify the final installation

  • Test the actual asset material and geometry.
  • Keep tag orientation and mounting process consistent.
  • Confirm bonding or fastener loads do not damage the tag.
  • Re-test RF performance after final installation.
SELECTION BOUNDARY

Choose by installed performance, not headline range alone

Compare footprint, retention, environmental exposure and required read zone. Request samples when the project has metal, temperature, chemical, impact or embedding constraints.

  • Specify the destination frequency region.
  • Share reader and antenna details.
  • Define normal and worst-case orientations.
  • Confirm current test and compliance documents required for approval.
BEST-FIT APPLICATIONS

Application starting points for Saber 80

Returnable Transport Items
Industrial Containers
Equipment & Fixtures
Outdoor or Harsh-Duty Assets
Metal Asset Tracking
APPLICATION VALIDATION

Validate Saber 80 before volume deployment

Evaluate representative samples with the intended asset, reader and operating environment. Include both normal and worst-case read orientations.

Asset material and geometry
Available mounting footprint
Mounting method
Required read distance
Reader and antenna
Frequency and environment
COMMON SELECTION QUESTIONS

Saber 80 selection FAQ

Is the listed read range guaranteed?

No. It is a selection reference. The installed result depends on reader power, antenna, orientation, asset geometry, mounting and the RF environment.

Which data should be confirmed before ordering?

Confirm the IC, memory, frequency region, encoding, marking, mounting and evidence required for production acceptance.

When are samples required?

Use samples whenever the application includes metal, embedding, tight read zones, temperature cycling, chemicals, impact, persistent moisture or regulated approval requirements.

What belongs in the RFQ?

Provide the asset, installation area, read-zone target, reader setup, environment, destination region and expected quantity.

ENGINEERING & COMMERCIAL SUPPORT

Evaluate Saber 80 for your application

Send Crepak the asset, read-zone and installation requirements. We can help compare the form factor and arrange representative samples for validation.

Saber 80 Long-Range On-Metal UHF RFID Tag
This website uses cookies to improve your experience. By using this website you agree to our Data Protection Policy.
Read more