Toruk 10 Dual-Frequency UHF and NFC On-Metal RFID Tag

58 x 19 x 2 mm FR4 on-metal RFID tag combining UHF inventory reading with NFC proximity access in one EM4423 device. The current product record lists up to 2 m UHF reference range on metal; validate both interfaces in the intended workflow.

Request a Quote

Category: SKU: 1391121

WHY TORUK 10

Connect long-range inventory workflows with item-level NFC access

Toruk 10 is a dual-frequency UHF and NFC on-metal RFID tag for industrial assets that need both multi-item inventory reading and close-range interaction. Its 58 x 19 x 2 mm FR4 body uses an EM4423 device with UHF and NFC interfaces.

UHF supports reader-based asset identification, while NFC supports proximity access from compatible readers or phones. Define what information must be shared or separated across the two interfaces before encoding and production release.

UHF + NFCInventory and proximity workflows
58 x 19 x 2 mmFR4 on-metal form factor
Up to 2 mCurrent UHF on-metal reference
EM4423Dual-interface transponder IC
DUAL-FREQUENCY WORKFLOW

Use UHF for inventory and NFC for intentional close-range interaction

The UHF interface supports multi-item reading with fixed or handheld readers. The current Toruk 10 product record lists up to 2 m on metal as a comparison reference, not a guaranteed installed distance.

The 13.56 MHz NFC interface is intended for proximity interaction and should not be evaluated using the UHF read-range figure. Test UHF and NFC separately with the intended readers, phones, asset surface, mounting and data workflow.

UHF interface902–928 MHz
NFC interface13.56 MHz
UHF referenceUp to 2 m on metal
Primary positioningDual-interface metal assets
TECHNICAL SPECIFICATIONS

Toruk 10 specifications

Mechanical
MaterialFR4
Dimensions58 x 19 x 2 mm
Mounting holeØ2.4 mm
Weight4.9 g
MountingAdhesive / screw / rivet
RF interfaces
UHF902–928 MHz; ISO/IEC 18000-63 / EPC Gen2 V2
NFC13.56 MHz; ISO/IEC 14443 Type A / NFC Forum Type 2
ChipEM4423
Current EPC configuration128 bits; confirm production configuration
UHF read rangeUp to 2 m on metal; application-dependent
Memory & deployment
Factory identifier96-bit shared identifier / UHF TID
NFC user memoryUp to 1920 bits in the current EM4423 record
UHF user memoryConfiguration-dependent; confirm before encoding
Primary directoryOn-Metal RFID Tags
Production releaseConfirm memory map, data sharing, frequency and mounting

Mechanical values and the installed UHF reference are based on the current Crepak product record. EM4423 memory is configuration-dependent; the quotation and encoding specification must define the supplied memory map. Request current production documentation when ingress, temperature, compliance, lifecycle or formal test evidence is part of the acceptance criteria.

MOUNTING & DATA SETUP

Validate the physical installation and the two-interface data model together

Toruk 10 supports adhesive, screw and rivet installation. The mechanical method affects the UHF read zone, while the application design determines what UHF readers and NFC devices should read or write.

  • Confirm mounting-hole and fastener clearance on the production version.
  • Validate adhesive bonding and tag orientation on the real metal asset.
  • Define EPC, NFC content, access control and any shared-data behavior before encoding.
  • Test with every intended UHF reader and representative NFC phone or reader.
BEST FIT / NOT SUITABLE

Choose Toruk 10 only when the workflow genuinely needs both UHF and NFC

Toruk 10 is best suited to metal assets that require bulk inventory plus intentional item-level access, inspection or service interaction. A standard UHF on-metal tag is usually simpler when NFC adds no operational value.

BEST-FIT APPLICATIONS

Industrial applications for Toruk 10

Inventory + Service Records
Work-in-Process Tracking
Returnable Transport Items
Equipment Inspection
Item-Level NFC Interaction
Application validation
APPLICATION VALIDATION

Validate UHF, NFC and shared data before volume deployment

Test representative Toruk 10 samples on the intended metal asset with the final mounting process, UHF reader and antenna. Separately validate NFC interaction with representative phones or readers, including normal and worst-case orientations.

Document the accepted UHF read zone, NFC user flow, memory allocation, encoding rules and access permissions before production release. The RFQ below collects the main engineering and commercial inputs.

Selection questions
COMMON SELECTION QUESTIONS

Toruk 10 selection FAQ

Is the 2 m read range also the NFC range?

No. Up to 2 m is the current UHF on-metal reference. NFC is a close-range interface and must be evaluated separately with the intended phone or reader.

Can UHF and NFC access the same information?

EM4423 supports shared identity and memory functions, but the supplied memory configuration and application permissions must be defined before encoding.

Why use a dual-frequency tag instead of a standard UHF tag?

Use dual frequency when the project needs both multi-item inventory and intentional close-range access to a specific asset. Otherwise, a UHF-only tag may be simpler.

What should be included in an RFQ?

Provide the asset, mounting area, UHF read zone, reader and antenna, NFC devices, required data for each interface, permissions, frequency region and quantity.

PRODUCT ENQUIRY

Enquire about Toruk 10



    Optional technical details





    ALTERNATIVE RFID TAGS

    Other Options for This Application

    Compare alternative sizes, constructions or mounting options for the same application.

    Toruk 10 Dual-Frequency UHF and NFC On-Metal RFID Tag
    This website uses cookies to improve your experience. By using this website you agree to our Data Protection Policy.
    Read more